Industrial floor drain DRS-OPTI-S

Industrial floor drain, single-part, Model DRS-OPTI, flow-optimised hygiene construction, according to EN 1253. Inlet rim solid 25 x 8 mm. The flow-optimised U-shaped air trap results in a high dirt removal rate while only requiring a small amount of fresh water. Perforated plate silt box stainless steel. Vertical outlet accessible by means of inspection opening. Surface grain blasted.

Model DN Ø d
[mm]
Diag. B
[mm]
Ø B
[mm]
Ø D
[mm]
H
[mm]
Silt box volume [ l ] Flow rate [l/s]
DRS-OPTI-100-E-S 100 100 246 218 245 1,4 > 2,8
DRS-OPTI-100-RD-S 100 100 270 218 245 1,4 > 2,8

Inlet rim: square, round

Material: 1.4301 (AISI 304), 1.4571 (AISI 316 Ti)

Description for use in tenders:

Industrial floor drain, single-part, Model DRS-OPTI, flow-optimised hygiene construction, according to EN 1253. Inlet rim solid 25 x 8 mm. The flow-optimised U-shaped air trap results in a high dirt removal rate while only requiring a small amount of fresh water. Perforated plate silt box stainless steel. Vertical outlet accessible by means of inspection opening. Surface grain blasted.

Related products

  • Industrial floor drain 2001-S

    Industrial floor drain 2001-S

    Industrial floor drain, single-part, Model 2001, according to EN 1253. Floor inlet nominal width 100 with…

  • Industrial floor drain 71-S

    Industrial floor drain 71-S

    Industrial floor drain, single-part, Model 71, according to EN 1253. Stable solid inlet rim. Completeness check…

  • Industrial floor drain 75-E-S

    Industrial floor drain 75-E-S

    Industrial large-size drain, single-part, Model 75, according to EN 1253. Edge protection reinforced by internal welded…

Contact Us Now

  • Location

Unit 11A, 1 – 3 Endeavour Road Caringbah NSW 2229

  • Phone

(02) 9540 2288 or 1300 628 104

  • Email

info@ozflow.com.au

  • Opening Hours

Monday to Friday 9:00 to 17:00